- 11 standard sizes from 355mm to 710mm
- Air volume flow rates up to 6.8 m3/s.
- Static pressures of up to 800 Pa.
- Suitable for operating temperatures up to +40°C.
- Suitable for extract or supply systems.
The SLCX is a range of ATEX rated duct mounted axial fans, manufactured in heavy gauge sheet steel. These units are designed to meet the requirements for Hazardous Areas with carbon filled anti-static impeller blades and protection to Ex II 2G c IIC T4 X.
FEATURES & BENEFITS
Learn more about individual features and benefits of our products.
The SLCX range of ATEX fans as manufactured by Elta Fans Ltd.
The technical information available to you from ELTA Fans is exhaustive - Choose from either sound, performance and electrical or dimensional data for each and every product
Elta supply a full range of accessories for each of their products.
Choose up to three products to compare their features side-by-side.
Get the full brochure, wiring diagrams and operation and maintenance instructions.
Features & Benefits
Classified for constructional safety and the requirements stated in 94/4/EU (ATEX) directive, Gas Zone and ignition temperature protection to Ex II 2G c IIC T4 X
Fan casings are heavy guage, sheet steel, roll formed and welded and hot dipped galvanised after fabrication to BS 729.
Each SLCX has a 12 month warranty.
Adjustable pitch aerofoil section impellers with blades made from high quality carbon filled anti – static material for enhanced performance. Hubs are die cast aluminium.
Fans can be mounted in any position.
Full accessory range
Speed controllers, Motor protection.
All units are designed and manufactured with procedures as defined in BS EN ISO 9001: 2008.
The SLCX range of ATEX fans as manufactured by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands, DY6 7US, UK. Tel: +44 (0) 1384 275800 - If you need more information - Contact us.
The all metal fan casing and guard provide a long lasting and robust construction. The units have been constructed from a single sheet of steel, with both motors and axial impellers mounted within the length of the unit casing. All casing parts are heavy gauge mild steel sheet, roll formed and welded, then hot dip galvanised to BS EN ISO 1461:1999 after fabrication.
Adjustable pitch aerofoil impellers are provided with blades made from high quality carbon filled anti – static material. Impellers are factory set at an angle to provide maximum performance.
Hubs are manufactured from die cast aluminium alloy (LM24). Assembled impellers are dynamically balanced to ISO 14694 Grade G6.3.
Motors according to Gas Zone, Ignition Temperature and Protection to Ex II 2G c IIC T4 X
Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All ATEX units are to be tested to ISO 5801:1997 (airside performance) and BS 848 Part 2: 1985 (sound performance).
- Chemical Process
- Water and Sewage Treatment
- Material and Gas Waste
- Dust and Paint Extraction
- Battery Room Ventilation and Refrigeration
Performance and Electrical Data
Tests and preparation of the sound data have been carried out in accordance with BS 848 Part 2:1985 at 50% peak pressure. The Sound Power Level Spectra are in dB re-1pW.
The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in dB re-20µPa and is presented for comparative purposes only.
Accessories & Wiring Data
Bell Mouth inlets (241B)
Fits directly to the fan case flange and provides easy connection to flexible connectorRead more
Impeller Guards (078C)
Bright Zinc plated Steel or glavanised. Fix with clips & screws (included)Read more
Mounting Feet (060B)
For free standing mounting of ducted fansRead more
Av Mounts (Rubber)
Spring AV mounts - zinc plated steel, rubber insert and foot padRead more