Raptor SFB

Raptor SFB

Left Arrow Return to ATEX / Products

Raptor SFB

samf main

The Raptor SFB is a range of Ziehl-Abegg ATEX rated plate mounted axial fans for internal mounting, manufactured in mild steel with a RAL9005 paint finish. These units are designed to meet the requirements for Hazardous Areas, with protection to Ex II 2G c Ex e IIB T4.

samf f&b_box


Learn more about individual features and benefits of our products.

samf spec_box


The Raptor SFB range of ATEX fans as manufactured by Elta Fans Ltd.

Technical information


The technical information available to you from ELTA Fans is exhaustive - Choose from either sound, performance and electrical or dimensional data for each and every product



Elta supply a full range of accessories for each of their products.



Choose up to three products to compare their features side-by-side.



Get the full brochure, wiring diagrams and operation and maintenance instructions.

SPP Features and Benefits

Features & Benefits

Ease of installation.

All models are supplied with 650mm long flying lead for direct electrical connection

Material strength

All metal casing and guard provides a long lasting and robust construction.


Each SFB has a 12 month warranty.


High efficiency pressed aluminium impellers are directly driven by an AC external rotor motor, designed to provide high performance characteristics.

Motor protection

All SFB units have integral PTC Thermistor for temperature monitoring.

Design appeal

Classified for constructional safety and the requirements stated in 94/4/EU (ATEX) directive, Gas Zone and ignition temperature protection to Ex II 2G c Exe IIB T4

Quality assurance

All units are designed and manufactured with procedures as defined in BS EN ISO 9001: 2008.

SPP Specifications


Raptor SFB range of ATEX fans as supplied by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands, DY6 7US, UK. Tel: +44 (0) 1384 275800 - If you need more information - Contact us.


The all metal fan casing and guard provides a long lasting and robust construction.

The units have been constructed from mild steel and suitably treated to ensure full corrosion protection, the guard shall be powder coated polyester epoxy paint finish in black (RAL 9005).

Fan plates shall have a surface coated to fulfil the requirements in DIN EN 13463-1 regarding electrostatic charges with paint finish in black (RAL 9005).


Pressed aluminium impellers providing low noise and increased efficiency with protective measures between rotating and stationary components, dynamically balanced to ISO 14694 Grade G6.3, and finished in black (RAL 9005).


Motors are Ziehl-Abegg, highly efficient, lightweight external rotor motors with sealed for life, maintenance free ball bearings; which allows the fan to be installed at any angle. Motors are all suitable for speed control and each motor has temperature monitoring by integrated PTC Thermistor.

Motors according to: Gas, Zone and ignition temperature. Protection to Ex II 2G c Ex e IIB T4 classified for constructional safety and fulfil the requirements stated in 94/4/EU (ATEX) directive.

Fans are suitable for operating temperatures between -20°C and +40°C. Electrical connection to the motor is via a 650mm long flying lead.

Quality Management

Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SFB units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).

Typical Application

  • Chemical Process
  • Water and Sewage Treatment
  • Material and Gas Waste
  • Dust and Paint Extraction
  • Battery Room Ventilation and Refrigeration

Technical Infomation

Dimensional Data





Performance & Electrical Data


Sound Data


Accessories & Wiring Data



  • Transformer Voltage Controller

    Transformer Voltage Controller

    Read more

Accessories & Wiring Data