QUBe SQU

QUBe SQU

 
Left Arrow Return to Centrifugal / Products
 

QUBe SQU

qube main
 

The QUBe SQU is a multi-discharge, double skinned fan unit incorporating the high performance backward curved Ziehl-Abegg RH-C impeller designed specifically for operation without a scroll. Supplied for straight through airflow with the outlet panel positioned directly opposite the inlet panel, but the outlet panel can be easily exchanged on-site to provide 90° airflow if required.

qube fb box

FEATURES & BENEFITS

Learn more about individual features and benefits of our products.

qube spec box

SPECIFICATION

The Qube range of centrifugal fans as manufactured by Elta Fans Ltd.

Technical information

TECHNICAL INFORMATION

The technical information available to you from ELTA Fans is exhaustive - Choose from either sound, performance and electrical or dimensional data for each and every product

Accessories

ACCESSORIES

Elta supply a full range of accessories for each of their products.

Compare

COMPARE

Choose up to three products to compare their features side-by-side.

Downloads

DOWNLOADS

Get the full brochure, wiring diagrams and operation and maintenance instructions.

SPP Features and Benefits
 

Features & Benefits


Material strength

Self supporting corrosion-resistant extruded Aluminium section, assembled with shock resistant fibreglass reinforced Polyamide PA6 corners ideally suited for general ventilation applications.

Motor performance

Three phase multi-voltage IP55 TEFC motor, wound for either (Delta) 230V/3Ph/50Hz or (Star) 400V/3Ph/50Hz connection, which is mounted using a unique low loss X-frame internal mounting arrangement, improving performance, and reducing noise generation, suitable for speed control with the Eltadrive VSD range of frequency inverter controls.
Motors are pre-wired to an IP55 terminal box mounted on the side, for easy customer connection.

Quality Impeller Design

High efficiency backward curved impellers with non-overloading power characteristics.

Choice

Straight through airflow as supplied. Discharge position can be altered on site.

Quality assurance

All QUBe units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2: 1985 (sound performance).

Ease of installation

All models are designed for direct connection to standard diameter flexible or rigid circular ducting with 50mm long spigots for ease of connection. Each spigot has an integral E PDM (Ethylene Propylene), UV + Ozone stable and resistant rubber seal which has a U shaped profile.

Full accessory range

Flexible connectors, attenuators, Eltadrive VSD frequency inverter controls, Eltadrive VSD frequency inverters (1Ph and 3Ph supply).

SPP Specifications

Specification

The Qube range of centrifugal box fans as manufactured by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands, DY6 7US, UK. Tel: +44 (0) 1384 275800 - If you need more information - Visit demandcontrolventilation.com. Or contact us.


Casing

Constructed from self supporting corrosion-resistant extruded aluminium section. Straight through airflow as supplied. Discharge position can be altered on site.

The inlet and outlet panels incorporate circular spigots with integral U-shaped ozone and UV stable EPDM rubber seals to prevent duct leakage.

Assembled with shock resistant fibreglass reinforced Polyamide PA6 corners, and 25mm thick double skinned removable panels, manufactured from pre-galvanised steel, in-filled with a non flammable mineral wool, 60kg/m³, thereby minimising breakout noise.


Impellers

A high efficiency backward curved welded steel impeller with a non-overloading power characteristic, finished with a powder coating to RAL 5002 for greater surface protection, and dynamically balanced to G2.5 / G6.3 according to ISO1940 part 1.


Motors

Three phase multi-voltage IP55 TEFC Foot / Flange mounted IEC frame motors, wound for either (Delta) 230V/3Ph/50Hz or (Star) at 400V/3Ph/50Hz connection, suitable for speed control when used with the Eltadrive VSD range of frequency inverter controls. Motors are pre-wired to an IP55 terminal box mounted on the side, for easy customer connection.


Quality Management

Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SQU units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).


Typical Application

  • Kitchens
  • Restaurants
  • Schools
  • Colleges
  • Shops
  • Sports Halls
  • Shower Rooms
  • Factories
  • Industrial Units
  • Warehousing
tech-ad

Technical Information


Dimensional Data

squ-dims













QUBe-SQU-DimTable2 new
All dimensions are shown in mm.

Performance & Electrical Data

QUBe-SQU-PE-ThreePh-AC 

Overall static efficiency, r/min and FMEG values are as per ISO 12759 installation category A.

FLC at 400V/3Ph/50Hz
Data provided at standard air density of 1.2 kg/m3.   The overall A-weighted sound pressure level is at a distance of 3m with spherical free-field propagation. It is expressed in dB re-20µPa and is presented for comparative purposes only.

Sound Data

QUBe-SQU-sound-ThreePh-AC 

Tests and preparation of the sound data have been carried out in accordance with BS 848 Part 2:1985 at 50% peak pressure.

The Sound Power Level Spectra are in dB re-1pW.

Accessories & Wiring Data

QUBe-SQU-accessories-ThreePh-AC

QUBe-SQU-accessories2Wiring-ThreePh-AC



Accessories

SQU-weather-hood-cylindrical
Product
Code
nA
(Nominal)
BCWeight
kg
064-SQU1-WHC 315 473 155 3
064-SQU2-WHC 500 750 248 7
064-SQU3-WHC 560 840 278 9
064-SQU4-WHC 710 1065 353 14
  • For use with SQU range.
  • External Weather Hood for outdoor applications.
  • Horizontal (WH) & vertical options (WHV).
  • Pre-fitted birdguard.
  • 0.9mm galvanised steel.

Accessories & Wiring Data

QUBe-SQU-accessories-ThreePh-AC

QUBe-SQU-accessories2Wiring-ThreePh-AC



Downloads