The Singleflow SSD...EC incorporates the BAT (Best Available Technology) Vpro backward curved impeller, with three dimensional profiled blades powered by the ultra reliable Ziehl-Abegg EC (electronically commutated) external rotor motor. The range of single in-line fans, designed to overcome space restrictions, is suitable for internal mounting.
- 11 standard sizes from 100mm to 710mm.
- Air volume flow rates up to 4.31m3/s (AC) / 4.4m3/s (EC)
- Static pressures of up to 1179 Pa (AC) and 1030 Pa (EC)
- Suitable for operating temperatures up to +60°C.
- Extensive range stock available.
FEATURES & BENEFITS
Learn more about individual features and benefits of our products.
The Singleflow SSD range of centrifugal fans as manufactured by Elta Fans Ltd.
The technical information available to you from ELTA Fans is exhaustive - Choose from either sound, performance and electrical or dimensional data for each and every product
Elta supply a full range of accessories for each of their products.
Choose up to three products to compare their features side-by-side.
Get the full brochure, wiring diagrams and operation and maintenance instructions.
Features & Benefits
Ease of installation.
All models are designed for direct connection to standard diameter flexible or rigid circular ducting with long spigots with EPDM rubber U shaped seals for ease of connection.
A robust, yet lightweight unit with a galvanised sheet steel casing.
High efficiency low tonal noise backward curved centrifugal impellers are directly driven by an AC or EC external rotor motor, designed to be non-overloading and provide high performance characteristics.
Each unit is supplied with integral mounting brackets.
Ideal for roof spaces and / or where space is at a premium.
All units are designed and manufactured with procedures as defined in BS EN ISO 9001: 2008.
Each SSD has a 12 month warranty.
The Singleflow SSD range of direct drive twin fans as manufactured by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands, DY6 7US, UK. Tel: +44 (0) 1384 275800 - If you need more information - Contact us.
Robust 1.2mm galvanised mild steel sheet casing. The casing is specially manufactured using integral motor mounting plates to provide additional rigidity for the casings.
Each casing provides spigots to suit standard circular ducting. EPDM (Ethylene Propylene) rubber U shaped seals (being ozone and UV stable) are used to ensure a good seal back to the duct that is to be attached.
Top & bottom access is provided as a standard feature to facilitate ease of maintenance and cleaning.
High efficiency low tonal noise backward curved centrifugal impeller, dynamically balanced to ISO 14694 Grade G6.3 and directly driven by the motor to provide a smooth airflow through the unit.
The single range of units may have either an EC or AC external rotor motor fitted as standard. The motor contains sealed for life bearings. Thermal Class of motors to THCL 130 or 155 dependent on size.
Manufactured by Ziehl-Abegg providing increased reliability. All motors are suitable for use in ambient air conditions up to 60°C.
All SSD units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).
All dimensions are expressed in mm.
Performance & Electrical Data
Overall total efficiency, r/min and FMEG values are per ISO 12759 installation category D. FLC at 230V/1Ph/50Hz A Variable Speed Drive is integrated within the fan.
Accessories & Wiring Data
Fast Clamps (018)
For quick connection of spigotted fans to circular duct or accessoriesRead more
Pre-galvanised sheet steel with perforated steel liningRead more
Av Mounts (Rubber)
Spring AV mounts - zinc plated steel, rubber insert and foot padRead more
Flexible Connectors (018)Read more
Panel Filters (018)
Filter access with removable panelRead more
Electric Heater Batteries
Safe and clean heatingRead more
Speed Reference Potentiometer
Speed reference potentiometerRead more