Ceiling Fan HCF
Ceiling Fan HCF
- 3 standard sizes: 900, 1200, 1400.
- Eliminates heat stratification in winter.
- Continuous cooling in summer.
- Suitable for operating temperatures up to +40°C.
- Fully reversible.
The Ceiling Fan HCF range of ceiling sweep fans, available in three sizes: 900, 1200 and 1400 are specifically designed to eliminate heat stratification by forcing warm or heated air down again. Equally, HCF units are also designed to provide positive air movement for continuous cooling.
Features & Benefits
Where minimal air disturbance is required, HCF fans can be fully reversed at the flick of a switch. With this setting, the air is forced upwards to the ceiling area, then down the walls to the desired area.
An additional safety feature of the ceiling fan is a steel cable which passes through the drop rod, connecting the motor body to the J-hook mounting bracket.
Capacitor start and run motor fitted with ball bearings. Class E insulation, suitable for 40°C ambient operating temperature
HCF fans are supplied with two down rod lengths as standard. The short down rod is 150mm,suitable where the fans are mounted below the ceiling or roof height, for example, beams. The long down rod is 400mm in length.
Units are designed and manufactured with procedures as defined in BS EN ISO 9001:2000.
The HCFC1.7 reversing ceiling fan controller provides an extra dimension to typical installations as the fan speed can be selected to match changing environmental conditions, particularly relevant to installations where the mounting height is lower
A full 12 months warranty on all HCF Models
The Ceiling Fan HCF as manufactured by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands DY6 7US, UK, Tel: +44 (0) 1384 275800 - If you need more information - Contact us.
The all metal fan casing shall provide a long lasting robust construction. The units shall have an additional safety steel cable which passes through the drop rod, connecting the motor body to the J-hook mounting bracket.
The fan blades are constructed from high quality steel, fully balanced, with epoxy powder coated finish for aesthetic appearance.
Motors are Capacitor start and run motor fitted with ball bearings, Class E insulation, suitable for +40°C ambient operating temperature.
Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008.
- Industrial Warehousing
- Store and Offices
Dimension A is determined by down rod length.
All dimensions are expressed in mm.