- 7 standard sizes from 315mm to 630mm.
- Air volume flow rates up to 1.76 m³/s.
- Static pressures up to 200 Pa.
- Suitable for operating temperatures up to +50°C.
- Can be mounted at angles up to 30°.
>Learn more about roof fans
The Heritage SCH range is a range of vertical discharge centrifugal fans designed for use in commercial kitchen exhaust systems and other applications requiring the combination of speed controllable motors with an all metal construction.
FEATURES & BENEFITSLearn more about individual features and benefits of our products.
SPECIFICATIONThe Heritage SCH range of roof mounted fans as manufactured by Elta Fans Ltd.
TECHNICAL INFORMATIONThe technical information available to you from ELTA Fans is exhaustive - Choose from either sound, performance and electrical or dimensional data for each and every product
ACCESSORIESElta supply a full range of accessories for each of their products.
COMPAREChoose up to three products to compare their features side-by-side.
DOWNLOADSGet the full brochure, wiring diagrams and operation and maintenance instructions.
Features & Benefits
All units are designed and manufactured with procedures as defined in BS EN ISO 9001: 2008
Tested to the very latest standards
SCH units are tested to ISO 5801:1997 (airside performance) and to BS 848 Pt 2:1985 (sound performance) meaning accurate, up to date information on performance and noise data that can be relied upon.
All SCH are powered by an external rotor motor.
Impeller designAerodynamically designed backward curved centrifugal impellers in either steel or aluminium dependant upon impeller selection.
Material strengthThe all metal cowls have a robust, long lasting construction, manufactured from galvanised steel
MountingCan be mounted at angles up to 30° which means the fans can be fitted directly to pitched roofs
Motors have sealed for life bearings.
The Heritage SCH range of roof mounted extract fans as manufactured by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands DY6 7US, UK, Tel: +44 (0) 1384 275800 - If you need more information - Contact us.
The all metal fan casing provides a long lasting and robust construction. The casings are manufactured from pre-galvanised sheet steel. The wind band shall incorporate quick-release toggle clamps to provide easy access for cleaning and maintenance. All SCH units can be mounted at angles up to 30°.
Motors shall be external rotor motor, with sealed for life ball bearings. Motors shall be minimum IP44 protected and minimum Class B insulation. All units are suitable for operating temperatures up to +50°C.
Aerodynamically designed backward curved centrifugal impellers constructed in aluminium or galvanised sheet steel. Impellers are balanced to ISO 14694 Grade G6.3.
Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SCH units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).
- Commercial Kitchens and Catering
- Forges and Foundries
All dimensions are shown in mm.
*The higher weight shown applies to the /4-2 & /4-3 versions.