Heritage SGE

Heritage SGE

Left Arrow Return to Roof Mounted / Products

Heritage SGE

Multiflow SMB

The Heritage SGE range of vertical discharge centrifugal roof extract units has been developed to simplify cleaning and general maintenance and to assist in the collection of grease in applications such as fast food restaurants, commercial kitchens and process work where exhaust air is grease laden.

Features & Benefits


Learn more about individual features and benefits of our products.



The Heritage SGE range of roof mounted fans as manufactured by Elta Fans Ltd.

Technical information


The technical information available to you from ELTA Fans is exhaustive - Choose from either sound, performance and electrical or dimensional data for each and every product



Elta supply a full range of accessories for each of their products.



Choose up to three products to compare their features side-by-side.



Get the full brochure, wiring diagrams and operation and maintenance instructions.

sge fb ad1

Features & Benefits

Quality assurance

All units are designed and manufactured with procedures as defined in BS EN ISO 9001: 2008.

Mounting arrangement

The unit should always be mounted on a horizontal plane.

Effective design

The housing incorporates a grease/water separator which allows excess rainwater to be plumbed away from the unit, while retaining the grease in a collector for later removal and environmental disposal.

Tested to the very latest standards

SGE units are tested to ISO 5801:1997 (airside performance) and to BS 848 Pt 2:1985 (sound performance) meaning accurate, up to date information on performance and noise data that can be relied upon.

Easy access

For maintenance access the unit is fitted with quick release toggle clamps which, when released,allows the unit to hinge open without the need to completely remove the cowl, and access is easily gained for cleaning.

Easy maintenance

The wind band can be easily removed by unlatching toggle clamps, allowing easy access to the impeller. Tilting the fan base assembly backwards provides ready access for cleaning the base.


Motors have sealed for life bearings.

SPP Specifications


The Heritage SGE range of roof mounted extract fans as manufactured by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands DY6 7US, UK, Tel: +44 (0) 1384 275800 - If you need more information - Contact us.


The all metal fan casing provides a long lasting and robust construction. The units have been constructed from galvanised mild steel sheet with a powder coat finish. The housing shall incorporate a grease/water separator and grease reservoir. Access for impeller cleaning shall be by removal of the wind band via toggle catches and a tilt back fan base assembly.


Motors are to be foot mounted totally enclosed metric type to IP55, with sealed for life bearings, standard industrial paint finish and Class F insulation to EN 60034-5, suitable for operating temperatures up to +50°C. Motors are to be wired via a weatherproofed cable to an IP55 protected terminal box mounted on the outside of the unit casing.


Aerodynamically designed backward curved centrifugal impellers constructed in aluminium or galvanised sheet steel. Impellers are balanced to ISO 14694 Grade G6.3.

Quality Management

Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SGE units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).

Typical Application

  • Commercial Kitchen
  • Catering Establishment
  • Service Stations
  • Fast Food Restaurant
  • Installation where Grease Laden Air is Being Extracted

Technical Information

Dimensional Data

sge dims

Performance & Electrical Data 


Sound Data


Accessories & Wiring Data




Accessories & Wiring Data