Ezifit In-Wall SEIE
Ezifit In-Wall SEIE
- Flush mounted and neutral colour grille to compliment most bricks.
- Can be wired in high, medium or low speed.
- 3 speed switch available for remote speed control.
- Suitable for operating temperatures up to +50°C.
- Compact design.
The Ezifit In-Wall SEIE unit is a flush mounted fan that’s ideal where a ceiling or in-line fan is impractical – such as kitchen canopies, or ducted exhaust systems between floors in residential applications, or through flat roof applications where quiet, powerful exhaust is required and space is limited.
Features & Benefits
The robust neutral coloured external plastic grille is designed to suit most brick colours.
Each unit is suitable for window, wall, panel or ceiling mounting installations.
Ease of installation
The Ezifit In-Wall unit is designed to install on an exterior wall and its compact design allows installation in tight spaces.
The flush mounted design provides an unobtrusive appearance.
A three speed backward curved centrifugal impeller increases the flexibility by allowing the desired speed setting to be selected either at the time of installation or by an optional remote mounted three speed switch
Ezifit In-Wall units provide powerful air extraction and are suitable for single or multi point extract
Each SEIE has a 12 month warranty.
The Ezifit In Wall Fan SEIE as manufactured by Elta Fans Ltd. 46 Third Avenue, Pensnett Trading Estate, Kingswinford, West Midlands DY6 7US, UK, Tel: +44 (0) 1384 275800 - If you need more information - Contact us.
The all plastic casing provides a long lasting, robust and non-corrosive construction. The units have been constructed from shockproof, heat resistant plastic, with both motors and impellers mounted within the length of the unit casing.
The robust neutral coloured external plastic grille is designed to suit most brick colours. Fly mesh is fitted to the inside of the grille as standard to keep out insects.
Impellers shall be single inlet backward curved centrifugal type. Impellers are balanced to ISO 14694 Grade G6.3.
Highly efficient, maintenance free external rotor motors shall be used, matched to the aerodynamic performance of the impeller. These shall be protected to IP44 and suitable for speed control and working temperatures up to +50°C.
Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SEIE units are to be tested to ISO 5801:2007 (airside performance) and BS 848 Part 2:1985 (sound performance).
- Domestic Kitchen Range Hood Exhaust
- Clothes Dryer Venting
- Sub Floor Ventilation
- Smaller Commercial Installation
All dimensions are shown in mm.
Performance & Electrical Data
Accessories & Wiring Data
Three Speed Switch
Three Speed SwitchRead more